Видео

They are not the "ultimate." They do not have a top clear map compartment. Big oversight.

😳

Torque spec for screws without risk of cracking windscreen?

You guys need to put on sth like this for the r 12 cruiser!

aerodynamic Look 5+ Quality 5+ But alot of wind noise... Anyway i suggest .i keep it !!!

BS - ADDING THE BACK REST BRACKET AND LUGGAGE RACK IS NEARLY IMPOSSIBLE WITHOUT SCRATCHING AND TEARING UP THE BIKE. MY BACKREST IS TWEAKED. FOR ONE PERSON TO MANEUVER BOTH OF THESE ITEMS AND GET SCREWS STARTED IS IMPOSSIBLE WITH TWEAKED CHEAP (EXPENSIVE) PARTS. GIVE ME A BREAK PEOPLE. FURTHER, THIS GUY TALKS ABOUT GREASE YET I RECEIVED GREASE AND LOCKTIGHT GRADE A (BLUE). SO I USED LOCKTIGHT AS THE SCREWS REMOVED HAD EVIDENCE OF LOCKTIGHT ON THE OLD HARDWARE. SO THERE IS THAT. IT IS 100F WITH 100% HUMIDITY AND AFTER 3 HOURS OF WRESTLING WITH THIS PILE OF CRAP I GAVE UP. I WILL TRY AND TWEAK THE BACKREST WITH A CLAMP TOMORROW AND TRY AGAIN. BUT THIS GUY SUGGESTS ONE CAN TAKE IT OFF. NEVER IN MY LIFE WOULD I GO THROUGH THIS CRAP AGAIN. FIGURES I ALWAYS GET THE SHIT PARTS. CHEAP CHINESE SHIT.

Is this a new version of the lower crash bars? I don’t see the integrated valve cover protectors on all the Wunderlich ones online. I like these much better! Thank you

Besides having somewhere to attach accessories what performance changes should I perceive?

Thank you.

Thank you!!!!

🎉

Now THAT’s the first fairing I’ve seen on the R18 that makes me say yes!

I think you should publish videos showing the effectiveness of those bars, because they are definitely the best looking.

This one is amazing!!!

What is the "8/30" He is talking about at @7:48 he didnt mention that tool at all in the beginning its quite frustrating

Why fit something thats going to chew your boots up?

I actually went to a Motorcycle shop/Dealer. I asked if they have something similar.

That’s wonderful.

Unnötig das Teil. Wer zu dumm ist den Blinker zu bedienen sollte keine BMW fahren. Fahre eine R1200R.

Top

Not Look better.

Do these bars allow reinstalling the spoilers that go on the RS models, and is there a red protector?

Will the 2019 Multistrada Enduro be equipped?

Nice video!

2015 노멀 가능-?

Hi. Do u guys have a luggage rack for the 1600b gran america.. (my have the trunk,but im looking for a little luggage rack to be able to put extra things) thanks... from Georgia USA.

Wunderlich by far the most over priced brand there is. I do not understand how anyone can support them. What is this a 500 percent mark up ? Gtfo here

Thank you ! This adapter is ok, a little too thick (I would happily take a version that is forgoing the additional USB ports and is much slimmer!) and super-pricey. USD 183 plus S&H in the US comes to over USD 200 for the adapter delivered to you. In Germany it is USD 116 plus S&H (no VAT for exports). I tried to order it there (I am a German native) and have it shipped to the US like I do from many other EU manufacturers/retailers for items for my bike (MRA, SE Engineerd, Dominator, Voigt Mototechnik, helmets etc from FC-Moto, etc. etc. etc.). Even with shipping it is usually more economic to buy in the EU because we do not pay the substantial VAT. Just takes longer to get the items. I was able to establish an account on their German web site, but they would not allow an order. I e-mailed them and they refereed to their US web site. I mentioned the huge and really unwarranted price difference and they said sorry. Wunderlich is already on the extreme expensive side for equipment, but they really rake US customer over the coals! I wrote a balanced and fact-based review on this item on their web site. Let's see if they publish it.

Do you have something for GSA 850? The stock brake pedal is really bad, I need to lift it up and make it litle wider.

How well does it work?

Will the shifter touch the cover if pulled upwards? How much is the gap between the shifter and the case?

Nice work!

Le support est placé à un bon endroit, mais il est obligatoire de laisser le pare-brise en position fixe car l'angle de la Gopro varie si on monte ou descend le pare-brise

I know of these new bars, but can't find them on any websites. They keep asking to select from BMW or HD.... No Ducati page 🤔 Would like to check price & avail in Aus and see some better pics. Current bars are huge & heavy......so how much are they and what do they weigh? 😡

Im looking for a backrest for my 2023 K1600 GT. Do you have anything for this model?

how much Canadian dollars for a 2018 BMW K1600 B Grand America? Thanks

I sold my RT 😢

Super

Will this fit on all motorcycles

I really like this product, thanks for putting together these installation instructions. A couple of comments that I hope will be helpful. First, it was difficult to see what was happening with the black gloves against the background of the black side pieces, perhaps wearing a lighter color glove would be helpful. Also, after the install I was expecting to see a pan out shot to see the newly installed frame covers w/ bags on either side, but the video ended - let's see how they look after they are installed - perhaps someone could even sit on the bike so you can see how they integrate with the rider. Cheers.

Hi Eddie, we spoke a few days ago. Install went well on a 2022 K1600 GA. Took your advice starting at 2mm, 3mm, 5mm, then finishing at 6.5mm. Used the loctite and silicone sealant. I used a mm ruler. Probably better to use a digital caliper (saw that on an older Wunderlich install video). Thanks again.

Install video?

Ian, you are a poet... great video!

I would love to know the details of how you get the spring in position. I have done this job once, and I struggled quite a lot with the spring. I'm about to do the job for a second time, and I'm sure it will go more smoothly but it's still challenging to deal with that spring.

I’m 5,11. Do you think it will work for me?

Can you say exorbitant pricing? 😮

Good video apart from when you have to stretch the rack onto the bike it’s impossible. I now have to take it to my local bike garage for him to fit it for me. The video shows that you need to stretch the rack to fit but he must have used some machine to stretch it, as I’m no weakling but was totally unable to do it.

It's hard to watch any hands on demonstration that features tattoos. I Don't buy products from companies that use tattoos in their marketing.

Well I'm very glad I found this video - I'm buying a guard for my GTL and I was wondering how difficult it might be to fit. Which is not difficult at all ! Thanks very much for posting.

It is really nice piece of plastic. I wonder if you can do something about R 1200 ST headlight? 😁